ELECTROSTATIC GENERATOR AND BOTTLE OF LEYDEN OF BOTTLE OF FILM
The bottle of Leyden is a realised electrical device with a glass bottle that allows to store electrical charges. The bottle of Leyden is a capacitor that has two drivers, one in the outer part and another one in the inner part. In order to construct our bottle of Leyden we will use as conductive aluminum lamina pieces (the one that are used for the kitchen).
 How one becomes
First you must obtain a alambrito, it cuts a piece of the aluminum lamina and surrounds with this photographic film reel bottle. Soon you must place in the interior another piece of aluminum lamina, if you wish you can use glue, ten well-taken care of to make dry a good time because the gases that remain in the interior can make operate the bottle. It takes the cover, you do a perforation and it introduces in this a screw and it assures down in the part of a piece of obtained wire of a paper clip for paper. This wire must make contact with the lamina that you placed in the interior. It takes a piece from cable (with several threads) and to hold it in the part of above of the screw, we will call to this part “collection brush?. It observes the drawing of down:
 
Electrostatic generator
He is generating is simply a tube of pvc that a fabric cloth or piece rubs with.

Equipment is made work placing the bottle of Leyden in the edge of a table, lugo you must do that the collection brush touches to the tube of pvc while beams to slide it rubbing in the cloth or fabric. The wire that sees that it leaves the bottle of Leyden is simply an Earth return, instead of this you can ask to which takes the bottle holding by the part that has the aluminum lamina. This person will not receive a unloading if she does not touch to the lamina and the screw.

OPERATION THEORY

A bottle of Leyden is an invented old capacitor in the middle of century XVI in the city of Leyden, of there its name. Its intention was to store static electricity to use it in electrical experiments. Basically, a bottle of Leyden is a glass container with a cover nondriver. The outside and the interior of the bottle are surrounded with aluminum paper that acts as plate to store loads. The glass wall enters metals both avoids that the two plates are touched. When connecting it to a generator, the internal metal stores a negative load and the external metal stores a positive charge. Connected separated cables to two metals act as drivers to transfer electricity.

 
AS THE GENERATOR WORKS

The principle is explained in the drawing of down:


You wish the complete planes with photos including? Results guaranteed to only $us1. - TO BUY BEAM CLICK IN THE BUTTON OF DOWN. (The planes are sent by e-mail in format pdf)

Questions a: Miguel Vargas via info@originaldustcover.com
 
More Experiments!

YOU WISH TO BUY THIS COMPLETELY ARMED EQUIPMENT AND WORKING? BY ONLY $US25. - HE IS YOURS. IT UNDERSTANDS PLANES, EXPLANATION AND COMPLETE AND READY REPORT TO PRESENT TO THE EDUCATIONAL ONE.

If you wish to buy this equipment and you wish more information on as acquiring it, you click Here

It sends a commentary or it asks a: cienciafacil@hotmail.com
Miguel Vargas

Thanks for your visit