ORIGINALDUSTCOVER - HOMEMADE EXPERIMENTS

PHYSICS EXPERIMENTS
EXPERIMENTS OF MATHEMATICAL
CHEMISTRY EXPERIMENTS
BIOLOGY EXPERIMENTS
EXPERIMENTS OF SOLAR ENERGY
PLANES OF EXPERIMENTS
ROBOTS AND ROBOTICS
IT BUYS THIS EXPERIMENT
ROBOTICS



SIMPLE CUTTER OF PLASTOFORM (TELGOPOR)

THAT HE IS NEEDED
Wood base
1 Piece of metal tube
Wire of nicromo
Cable of coneccion
Screws
OriginalDustCover

This he is a cutter of plastoform very simple to construct in just a short time and with few tools. A wire of nicromo is used that can be changed uinjo more thickness if it needs to cut plastoform (also called telgopor) more thickness and therefore more current is needed.

As source of being able is used a medium transformer of about 3 Amperes and 12 volts.

The table is of wood agglomerate and any heavy wood plate can be used. The same can be shelp of the base.

The support of the wire of nicromo is a metal or aluminum tube doubled in an angle of 90 degrees. By the interior one of the cables is inserted that are connected to one of the ends of the wire of nicromo.

We notice in the photo of down that the table has an a grooves to the means by which the wire of nicromo is introduced until the part inferior where the other end subjects.

In view of which he was needed that the cutter could cut in certain angles. He came himself to place an addition so that the metal tube can be turned aside in any angle that is needed, as it is possible to be seen in the photo of down.

hotwire foam to cutter angle adjustment


It buys the planes completosa of this cutter, complete photos and drawings are included to arm without problems. Beam click in the button of down and buys your planes!








Book: Alternative energies GREAT SUPPLY Book: Introduction to the Enerías Alternative with EXPERIMENTS!
EXPERIMENTS FOR FAIRS OF SCIENCES GREAT SUPPLY Book: EXPERIMENTS FOR FAIRS OF SCIENCES!